These fantastic, low-level, marker lights with eyelid detail provide useful illumination and a very desirable light effect. They also benefit from the use of high-quality materials that make it suitable for use inside and out.

Low-level light is great installed along lower walls for low-level illumination or as guide lights for steps and pathways.

Choose between black, grey and brass finishes. The brass version is suitable for coastal locations.

IP65 rated which provides protection from water and makes them suitable for outdoor use, and great for the British weather!

Semi-recessed design means only a circular hole is required (62mm diameter) and this may also house the small, 3 watt, LED power supply.

If desired, or to suit the design, a number of these LED lights can be operated by a larger LED power supply which can be installed remotely. Wire in series only.

3000°k warm white colour temperature - 2 Watt. Dimmable when used with a dimmable driver and circuit has sufficient loading.

Comes complete with a 3-year warranty excluding the finish which is brass and unlacquered, a natural patination and mottling will occur, if you wish to keep a bright shiny surface the bezel should be rinsed and polished to maintain the original finish. If untreated the surface will oxidise like any other exposed metal in a seaside location.

View more items from this supplier

Lamp Type	Long Life LED Light Source
Lamp Lumens	82
Lamps Included	Yes
Dimmable?	Yes - when using the specified equipment
Max Wattage	2w
Diameter	80mm
Depth/Projection	40mm
Suggested Void Depth	30mm
Cut-Out Diameter	62mm
Construction	Mixed
Wiring Details	Class 3 - Requires a low voltage supply
IP Rating	IP65
Kelvin	3000°K - Warm White
Driver	No driver or transformer is supplied with this fixture (sold separately)
PDF Document(s)	View PDF View PDF

I'm installing a total of 12 lights on the same circuit. can I power from a bigger driver (bigger than 10w) and whats the maximum length we can run?
The biggest driver is the 18w dimmable driver that would allow 9 fittings to be installed. if you require the full 12, 2 x 10w drivers would be required.

Do you have a typical detail section through this product and how it would fix to a wall?
Please see the instructions and datasheet under the specification tab which will hopefully answer any questions you have.

Hi have purchased 3 of these what is the best transformer To purchase if I want to use them with a dimmable switch? Many thanks
The only dimmable power supply available is Product Ref: 30752. This could be used with 3 fittings.

Can you advise which of the drivers I should choose, or why one over the other? I am looking to order 6 fittings. Should I buy the 3w or the 10w driver?
These lights are 2w each. Meaning a 10w driver could power up to 5. 6 fittings would require 1 x 10w driver and 1 x 3w driver or if you would like them on individual drivers, you would use 6 x 3w drivers.

It states that the suggested void depth is 30mm, however, the plastic casing is more like 60mm - can you cut this down?
The plastic casing can be removed altogether which will then give you a 30mm depth, or should you need the plastic casing for your installation there is no reason as to why it cannot be cut down.

What precisely does semi recessed mean?
Partially in the wall and partially out.