These eyelid detail plinth lights are extremely popular in the kitchen design world. A cute variation of the normal marker lights with the functional twist of directing light towards to your floor to reduce upwards glare.

This LED plinth light kit is finished in brushed nickel and has a colour temperature of 4000K creating a neutral white light. This works really well with white, black and grey surfaces as well as granite, slate and blue or green surfaces.

Includes 4 LED eyelid light heads and the appropriate LED driver.

Easy to install, just plug and play each plinth light into the sockets on the LED driver and wire the driver to a 3-pin plug or fused spur. Perfect for kitchens and walkways where added light and guidance could be needed. Low energy and cool running temperature as these fittings only use 1 watt each.

Housing is included so these can be recessed or surface mounted!

Drill hole size 28mm
Cable length 1500mm

Driver Dimensions length 70mm x width 40mm x height 20mm.

Number Of Lamps	4
Lamp Type	Long Life LED Light Source
Lamps Included	Yes
Dimmable?	No
Total Wattage	4w
Width	32mm
Suggested Void Depth	15mm
Cut-Out Diameter	28mm
Construction	Stainless Steel
Wiring Details	Class 3 - Requires a low voltage supply
IP Rating	IP44
Kelvin	4000°K - Neutral White
Driver	Includes remote driver/transformer suitable for 230 - 240v supply

Are these supplied in a warm white?
These are only available in a neutral white (4000K).

Do you supply the small connection / junction box ?
There are four lights which can be connected directly into the LED driver, which is supplied. A mains junction box is not supplied.

The description says just plug and play each plinth light into the next...implying they're current driven.....but in the frequently asked questions it says all the fittings are wired into a 4 way connector block on the driver! ..that would imply they're voltage driven....which one are they as I need current driven so I can get a long line of daisychained lights.
In the box are four LED heads and a power supply pre-wired to a connector block into which the LED lights are plugged in. Plug and play is used to describe how the light can be installed by an average DIY enthusiast. These lights are constant voltage, not constant current - sorry for any confusion.

Do you do the eyelid units in brass effect? Are they available in larger packs - say 6 to 8?
These are only available in the brushed nickel finish. Unfortunately, we only have these available in 4 light kits. You could purchase additional kits to get the desired amount.

Can more than one set work from one driver? Can they be daisy chained?
The driver included in the kit can run a maximum of 4 lights. All fittings are wired into the 4 way connector block on the driver.

Can these be integrated into house lighting and operate with a dimmer switch?
These can be used around the home, However they are not dimmable. Just on/off.

If I want 6no. LED lights, can I install the 6 and using 2 kits, The 2 drivers control 3 LED lights each?
The driver has no minimum load, So using 3 on one driver would be fine.